Maytag Washer Lid Lock Bypass – How To Bypass

Is your Maytag washer displaying an error code that indicates the lid lock is malfunctioning? If so, don’t panic! There is a way to bypass the lid lock and get your washer up and running again. In this blog post, we’ll show you how to do it. Keep reading for instructions.

Will A Maytag Washer Work Without A Lid Lock?

Yes, if you’re wondering whether you can operate a Maytag washer without a lid lock. Although the washer will function without the lid lock engaged, it’s not recommended as it significantly increases the risk of injuries.

Without the lid lock, there’s nothing to prevent the washer’s lid from opening during operation. If someone were to open the lid when the washer runs, they could be seriously injured by the rotating blades. For this reason, it’s always best to use the washer with the lid lock engaged.

Can You Bypass A Washing Machine Lid Lock?

Trying to open a washing machine lid that’s been locked can be frustrating, especially if you’re in a hurry to get your laundry done. Fortunately, there are a few ways to bypass the lid lock, depending on the type of washer you have.

Some models have a heat-activated lock, which can be overridden by letting the machine cool down for 10 minutes. Other washers have an electronic lock that can be bypassed with a magnet or by disconnecting the power supply. If all else fails, you can always call a professional appliance repair service to get the job done.

With a little patience and ingenuity, you should be able to open even the most stubborn washing machine lid.

Learn More: 123 VS 123A Batteries – Which One Is Better

Maytag Washer Lid Lock Bypass

How Do I Reset My Maytag Washer Lock?

If your Maytag washer becomes locked during a wash cycle,  few things are there you can do to reset the lock.

  • First, unplug the washer or disconnect the power.
  • Then, wait approximately 2 minutes for the control to reset.
  • Next, reconnect power to the washer (plug-in).
  • Finally, run a “Drain and Spin” cycle.

If you follow these steps, the washer should be successfully reset and unlocked.

How Do You Manually Unlock A Maytag Top Load Washer?

Many top-load washers activate a locking mechanism when the washer lid is closed. This feature is meant to prevent young children from opening the door of washer and injuring themselves. However, this feature can also cause problems if the washer is locked. If you find yourself in this situation, there is no need to panic.

Few simple steps are there that you can follow to unlock a Maytag top-load washer manually. First, locate the control panel on the front of the machine. Then, press and hold the “Lock” button for three seconds. The locked icon should now be gone from the display. If not, press and hold the button again. You should now be able to open the washer door and continue with your laundry.

Maytag Washer Lid Lock Bypass

How To Bypass The Lid Lock On A Maytag Or Whirlpool Washer

If your Maytag or Whirlpool washer won’t start because the lid is locked, there is a way to bypass the lock.

Unplug the washer from the power outlet. Then, open the washer’s door and remove the detergent dispenser drawer. Next, locate the plastic tab on the right side of the drawer opening. This tab activates the lid lock mechanism. Gently push on the tab until it clicks into place. The washer should now be unlocked and ready to use.

Remember that bypassing the lid lock will also disable the child safety feature, so be sure to keep an eye on small children if they are near the washer while in use.

Learn More: Can You Drink Triple Sec By Itself?

How Do You Turn Off The Lock On A Maytag Washing Machine?

Remembering how to deactivate the Control Lock feature on your Maytag washing machine can be tricky. The good news is you need to follow only a few steps.

First, make sure that the machine is turned on. If you don’t see the 3-2-1 countdown, you may need to press the POWER button first. Then, touch and hold the button for 3 seconds.

It should deactivate the Control Lock. If this doesn’t work, try unplugging the machine or turning off the breaker for 1 minute. Then power the machine back on and try again.

Final Verdict: Maytag Washer Lid Lock Bypass

The three most common ways to bypass the lid lock on a Maytag or Whirlpool top-loading washer are a key, a pen, or a paperclip.

  • You can purchase a replacement from an authorized dealer if you have lost your key.
  • If you cannot find your key, or if it is broken, you can use a pen or paperclip to unlock the lid.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button